User's Manual

iSmartEV P01 User Manual
www.newsmartsafe.com
35
Click to stop recording and the system will
automatically jump to the page of value modification.
Click the data stream option to modify the values in the
[Minimum Value] and [Maximum value] columns. After
modification, click [Save] to save your customized data
stream value as sample data stream. All sample data
streams are saved in "Main Interface" -> "Test Report" -
> "Vehicle Detection".
【Graphic】
Displays the parameters of the selected data
stream as a waveform diagram.
• Free combination: The graphics are presented in
combination for users to compare. Select (A
maximum of four data streams can be selected) the
data streams to be viewed. The corresponding
waveform is displayed on the screen. To remove
unnecessary options, cancel the selection.
• Numerical value: Displays parameters in
numerical and list form.
【Report】
Click to save the current data stream value as a report.
The saved test report is stored in "Main Interface" ->
"Test Report" -> "Vehicle Test".
【Recording】
Click to start recording test data. The recorded test
data can provide an important reference for technicians
to troubleshoot vehicle problems. To stop reading, click
the button in front of the progress bar.
Note: The saved file is named after vehicle type
+VCI device serial number + system time when
recording starts. To distinguish file names, please set