User's Manual

iSmartEV P01 User Manual
www.newsmartsafe.com
38
(3) Scrape the coating area of the ADAS activation card to display the activation
code. Enter the 24-digit activation code, and then click [Activate] to activate
the ADAS function.
(4) After successful activation, the calibration function of ADAS can be used
normally.
10.2 Start calibration
Users need to perform the calibration as prompted on the host. The ADAS
calibration function is introduced through the ADAS demo program as follows.
Note: Before performing the ADAS calibration operation, make sure that the
VCI connector is connected to the vehicle diagnosis seat and the Bluetooth
communication between it and the host is normal.
10.2.1 ADAS system selection
Use this function to select the ADAS system to be calibrated through ADAS.