User's Manual

iSmartEV P01 User Manual
www.newsmartsafe.com
39
10.2.2 ADAS system scanning
Use this function to scan which ADAS systems are installed on the test vehicle.
The ADAS system supports two display modes: topology and list. Click [Start
Scanning] to scan the ADAS system one by one. After the scan is complete, click
the system displayed in red (the system is displayed in red, indicating that there
is a fault code in the system) to view the fault code, and click the system that
works normally (the system is displayed in green, indicating that the system
works normally) to perform other diagnostic functions.
10.2.3 ADAS calibration function
Users can use this option to perform ADAS calibration operations. To perform
this function, please coordinate with a calibration tool such as ADAS Mobile or
ADAS PRO+. The calibration tool is used to locate the calibration target, and the
plate is used to guide the user on how to position the calibration function and
provide detailed calibration steps.
Click [ADAS calibration function] to enter the following page: