User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
115
BENCH mode cable.
8. Connect the new gearbox ECU to the iSmartIMMO G3
according to the steps 3 and 4.
9. Tap Restore EEPROM Data, select the EEPROM data backed
up in step 5, and tap OK to write the EEPROM data of the original
vehicle gearbox in the new gearbox ECU.
10. Tap Restore FLASH Data to write the FLASH data of the
original vehicle gearbox backed up in step 6 into the new gearbox
ECU.
Situation 2:
1. Tap Gearbox.
2.
Select Gearbox type according to the specific model, here we choose DQ200-
MQB (take this as an example) to enter the function selection screen.
Note: The function selection screen varies by different vehicle
manufacturers.
3.
Tap View Writing Diagram to view how to connect the original car gearbox
ECU with iSmartIMMO G3 using the BENCH mode cable and its associated
adaptor cable.
Note: Vehicle gearbox connection could vary depending on
gearbox types, for information how to connect the car gearbox,
refer to the onscreen connection diagram.