User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
91
increased and engine output power is reduced. In this case, the
GPF replacement or regeneration must be performed.
11.19 Transport Mode
In order to reduce power consumption, the following functions
may be disabled, including limiting the vehicle speed, not waking
up the door opening network, and disabling the remote control
key, etc. At this time, the transport mode needs to be deactivated
to restore the vehicle to normal.
11.20 Tire Reset
This function is used to set the size parameters of the modified or
replaced tire.
11.21 Windows Calibration
This feature is designed to perform door window matching to
recover ECU initial memory, and recover the automatic ascending
and descending function of power window.
11.22 AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or
filled up, urea reset operation is required.
11.23 NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen
oxides (NOx) in engine exhaust. If the NOx fault is re-initialized
and the NOx catalytic converter is replaced, it is necessary to
reset the catalytic converter learned value stored in the engine
ECU.
11.24 Injector Coding
This function enables you to write injector actual code or rewrite