User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
92
code in the ECU to the injector code of the corresponding cylinder,
so as to more accurately control or correct cylinder injection
quantity.
It needs to be performed in the following cases:
After the ECU or injector is replaced.
11.25 Stop/Start Reset
This function is used to open or close the automatic start-stop
function via setting the hidden function in ECU (provided that the
vehicle has a hidden function and supported by hardware).
11.26 Sunroof Initialization
This function enables you to set the sunroof lock off, closed when
it rains, sliding / tilting sunroof memory function, temperature
threshold outside the car etc.
11.27 Suspension Calibration
This function enables you to adjust the height of the body.
It needs to be performed in the following cases:
1) When replacing the body height sensor, or control module in
the air suspension system.
2) When the vehicle height is incorrect.
11.28 Language Change
This function is used to change the system language of the
vehicle central control panel.
11.29 Intelligent Cruise Control System Diagnosis
It is used for matching after the intelligent cruise control module is
replaced or repaired.
11.30 AC System Relearn/Initialization