User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
95
(3) Scrape the coating area of the ADAS activation card to display
the activation code. Enter the 24-digit activation code, and
then tap Activate to activate the ADAS function.
(4) After successful activation, the calibration function of ADAS
can be used normally.
12.2 Start Calibration
Users need to perform the calibration as prompted on the host.
The ADAS calibration function is introduced through the ADAS
demo program as follows.
Note: Before performing the ADAS calibration operation,
make sure that the VCI connector is connected to the vehicle
diagnosis seat and the Bluetooth communication between it and
the host is normal.
12.2.1 ADAS System Selection
Use this function to select the ADAS system that requires ADAS
calibration.