User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
78
measurement.
3) Tap Close the Measurement or click the TEST button again
to end the measurement, and the measured resistance value and
measurement duration will be displayed on the screen.
9.3.2 Voltage Measurement
1. Tap Voltage Measurement, and then select "DC voltage" or
"AC voltage" according to the type of power supply to be
measured. You can also switch to the required option through the
MODE button.
2. Insert one end of the red insulation test clip into the "LINE" port
and connect the other end to the positive electrode of the power
supply to be tested. Insert one end of the green insulation test clip
into the "EARTH" port and connect the other end to the negative
electrode of the power supply to be tested.
3. The screen will display the measured voltage value.