User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
11
3. Initial Use
3.1 Charge the Tablet
Warning: Please use the charger that comes with the product
for charging. We are not responsible for any damage or economic
loss caused by charging with a charger other than the one
designated by us.
Please follow the following steps to charge the iSmartEV P03
tablet:
1. Insert one end of the switching power supply into the DC power
jack of the host, and connect the other end to the power socket.
2. If the battery identifier on the screen is displayed , then the
battery is being charged.
3. When the battery identifier is displayed , the charging is
complete.
Note:
If the device has not been used for a long time or the battery
power of the device is exhausted, you may not be able to turn it
on normally when charging. This is a normal phenomenon.
Please charge the device for a period of time and then try to start
the device.
The battery can be recharged. But because the battery is a wear
and tear product, after a long time of use, the standby time of the
device will be shortened. So please avoid frequent and repeated
charging to prolong the battery life.
3.2 Turn On/Off