User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
44
type. and conditions. Click again
to retract the submenu.
4 Horizontal Trigger Position Mark
Press and hold and drag
left and right or use the
"horizontal position
adjustment knob" in the
function button area to
adjust the horizontal trigger
position.
5
Save
It can quickly save the measurement
waveform of the currently open channel.
To change the save path
and file type, tap Menu ->
Save to set.
6
Horizontal Setting
Control the horizontal time base.
Click once to expand the
horizontal time base option
and select the appropriate
time base value, or use the
"horizontal time base
adjustment knob" to adjust
to the appropriate time
base value.
7
Single Trigger
Capture a trigger, complete the
acquisition, and then stop.
8
Automatic
Click to enable the automatic range
function. When the automatic range
function is enabled, the oscilloscope will
automatically set various parameters,
including vertical scale, horizontal time
base and trigger level. When the signal
is connected, these parameters will
change automatically, and there is no
need to operate again after the signal
changes. The oscilloscope will
You can also click the
"AUTO" button in the
function button area to
enable the automatic range
function.