User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
49
2. Connect the black pin to the ground wire port of the vehicle
sensor, and insert the pins of other colors connected to the red
connector on the signal terminal of the vehicle sensor.
7.3 How to Operate
7.3.1 Channel Selection
The system has CH1 (channel 1), CH2 (channel 2) and REF
(reference channel). Select the channel as follows:
A. Select the channel through the channel button on the right
side of the screen.
B. Select the target channel through the channel button in the
function button area.