User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
34
Results By comparing the reports before and after
maintenance, the maintenance technician can
clearly understand whether the fault codes
found before maintenance have been
completely cleared after maintenance.
Note: Before performing this function, please
ensure that:
• The Pre-Repair inspection report of the current
test vehicle has been saved; and
• Repairs have been carried out on the basis of
the inspection report before maintenance, and
the code has been cleared. Otherwise there
will be no difference between the reports
before and after the maintenance
Diagnostic
Plan
Click to view the reason analysis of the fault
code.
Clear
DTCs
Click to clear all the fault codes.
Note: For general models, please strictly
follow the conventional sequence: read the fault
code first, then clear the fault code, test run,
read the fault code again for verification, repair
the vehicle, clear the fault code, test run again
to confirm that the fault code does not appear.
6.2.2 System Scan
This function is used to scan which systems the vehicle is
equipped with.
Tap System Scan on the test option selection interface, and the
system starts to scan the vehicle system. After the scan is
completed, the screen will display the scan results.