User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
66
3. Insert one end of the black multimeter test lead into the "COM"
end. If the current is greater than 400mA, insert one end of the
red multimeter test lead into the "A" end. If the current is less than
400mA, insert one end of the red multimeter test lead into "mA
μA" end.
4. Connect the black and red test leads to the tested point. Keep
contact stable.
5. Tap Start, and the value will be directly displayed on the
screen.
8.2.3 Resistance Measurement
1. Tap Multimeter on the main interface or click the "Multimeter"
function switch button on the upper right corner of the host.
2. Select "Resistance".