User's Manual

iSmartEV P03 User Manual
www.newsmartsafe.com
68
3. Insert one end of the black multimeter test lead into the "COM"
end and one end of the red multimeter test lead into the "V/Ω"
end.
4. Connect the red test lead to the positive electrode of the diode
and the black test lead to the negative electrode. Keep the
contact between the pen and the diode stable.
5. Tap Start, and the forward conduction voltage reading of the
diode will be directly displayed on the screen.
6. Click button to save the measurement results.
8.2.5 On-off Measurement
1. Tap Multimeter on the main interface or click the "Multimeter"
function switch button on the upper right corner of the host.
2. Select “ON/OFF”.