User's Manual

FAQ

OPERATIONSAFETY OVERVIEW SETUP

SS LINK User Manual www.newsmartsafe.com

Note: Before performing this function, please make sure that:

• You have saved a pre-repair report of the currently tested vehicle, and

• You have already made some repairs and service and cleared the DTCs after the pre-

repair reported is generated. Otherwise, no dierences exist between the pre- and post-

repair reports.

Clear DTCs: Tap to clear the existing diagnostic trouble codes.

Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set.

If proper repairs to correct the problem that caused the code(s) to be set are not made, the

code(s) will appear again and the check engine light will illuminate as soon as the problem

that cause the DTC to set manifests itself.

6.2.2 System Scan

This option allows you to quickly scan which systems are installed on the vehicle.

Tap System Scan on the test item selection screen, the system starts scanning the

systems. Once the scanning is complete, the screen will display the result.