Operation Manual

11
Set up the Monitor
1. Flip out the stand, extend the antenna, connect AC/DC adapter to the power input on
the side of the monitor. Then connect the other end of the adapter to the nearest
power outlet.
Press and hold the POWER button on the top of the monitor for 3 – 4 seconds to
power it up.
2. The receiver displays Welcome Screen for a few seconds and then transitions to the
LIVE view.
3. Place the SD card into the SD card slot located on the side of the monitor.
Note: The screen remains dark until the camera is powered up.
With the camera installed and Monitor set up, you can now customize your system
settings. Please refer to the System Operation section.
You can also establish your digital wireless security system on the APP. Please refer to
the Remote Access section.