Operation Manual

Add Sensor
(up to 50
wireless
sensors)
(Applies to
sensor type of
devices only)
No delay: alarm will sound immediately without any preset delay
Enter PIN code + 15 + 0 +
Security Mode 0
Sensor activated only when Fully arm
Sensor will not be activated in Partial Arm.
Enter PIN code + 15 + 1 +
Security Mode 1
Sensor activated in both Fully arm and Partial Arm
With Delay: alarm will sound after a preset Entry delay period
Enter PIN code + 15 + 2 +
Security Mode 2
Sensor activated only when Fully arm
Sensor will not be activated in Partial Arm
Enter PIN code + 15 + 3 +
Security Mode 3
Sensor activated in both Fully arm and Partial Arm
24Hr Intruder Mode : alarm will sound immediately even if disarm
Enter PIN code + 15 + 4 +
Security Mode 4
Sensor activated when Disarmed / Partial Armed /
Fully Armed and will cause an immediate alarm.
Note: Fire Sensors / Flood Sensors must choose
this Type (24 hours).
Delete sensor
Enter PIN code + 20 + 1 +
Delete all sensor zones
Enter PIN code +
20
+
1
+
1-9 +
Delete sensor zone 1-9
Enter
PIN code
+
20
+
1
+
0 +
Delete all sensor zones after 10
Add Remote
keyfob
(up to 10
remote)
E
nter
PIN code
+
15
+
Same procedure for Remote keyfob, RFID Tag
and Keypad
Delete Remote
keyfob
Enter PIN code + 20 + 2 +
Delete all remote keyfobs
Enter
PIN code
+
20
+
2
+
1-9 +
Delete remote keyfob 1-9
Enter PIN code + 20 + 2 +
0 +
Delete remote keyfob 10
Add RFID
Tags
(up to 50 tags)
Enter PIN code +
15
+
Same procedure for Remote keyfob, RFID Tag
and Keypad
Delete RFID
Tags
Enter PIN code +
20
+
3
+
Delete all RFID tags
Enter PIN code +
20
+
3
+
1-9 +
Delete RFID tag 1-9
Enter PIN code +
20
+
3
+
0 +
Delete all RFID tags after 10
Add wireless
keypad
Enter
PIN code
+
15
+
Same procedure for Remote keyfob, RFID Tag
and Keypad
Delete
Wireless
keypad
Enter
PIN code
+
20
+
4
+
Delete wireless keypad
Add indoor
siren SE822
Enter PIN code +
1. Put SE822 in binding mode.
2. Enter PIN code + DISARM key.
If SE822 fails to bind, repeat step 1 and 2 above.
Add/Change
Host Number
Enter PIN code +
66
+ +
Owner’s mobile Number +
The host number will receive a success
confirmation SMS.
This number will also be added into the list of
Alarm Voicecall number, Alarm SMS Phone
number and Speed Dial No. in Appendix B.