Operation Manual

Get
Zone 1 Name
91
(Note 2)
(Note5)
Zone1 Name:
Zone1
Change
Zone 1 Name
Zone1 Name:
Entrance Door
Sensor1
Use result from
Get command, do
SMS Forward->
Edit->Send back
Set Zone Name Successfully
Get
Zone 2 Name
92
(Note 2)
(Note5)
Zone2 Name:
Zone2
Change
Zone 2 Name
Zone2 Name:
Entrance Door
Sensor2
Use result from
Get command, do
SMS Forward->
Edit->Send back
Set Zone Name Successfully
…same for Zone Names 3 ~ 9
Get
RFID Tag Names
10
(Note 2)
(Note5)
Tag Names:
1.
2.
3.
4.
Change RFID
Tag Names
Tag Names:
1. Jack
2. Daniel
3. Henry
4. Joe
Use result from
Get command, do
SMS Forward->
Edit->Send back
Set Tag Names Successfully
Get
Entry Delay &
Exit Delay Time
11
(Note 5)
Entry & Exit Delay Time(0-240 sec.):
15
Set
Entry Delay &
Exit Delay Time
Entry & Exit Delay
Time
(0-240 sec.):
10
Use result from
Get command, do
SMS Forward->
Edit->Send back
Set Delay Time Successfully
Get
Siren Volume
12
(Note 5) Siren Volume (0 Mute, 1 Low, 2 High): 2
Set
Siren Volume
Siren Volume (0
Mute, 1 Low, 2 High):
1
Use result from
Get command, do
SMS Forward->
Edit->Send back
Set Siren Volume Successfully
Get
Siren Alarm
Duration
13
(Note 5)
Siren ringing time (1-9 minutes):
3
Set
Siren Alarm
Duration
Siren ringing time
(1-9 minutes):
5
Use result from
Get command, do
SMS Forward->
Edit->Send back
Set Siren Time Successfully
Note1: Maximum length for telephone numbers is 20 digits. Only numbers 0 – 9 and
“,” can be used. For example, phone number 0222606868 with extensions
1234 will be input as: “0222606868,1,2,3,4”. If the length exceeds 20 digits,
only the first 20 digits will be saved while the rest will be deleted.
Note 2: Maximum length for Zone Names and Tag Names is 24 characters
(alphanumeric characters only). If the length exceeds 24 characters, only the
first 24 characters will be saved while the rest will be deleted.
Note 4: Do NOT add or delete spaces or other symbols, or change Title content, as
SMS configuration may fail if those are changed. For example, when setting
Zone1 Name, the zone name must be entered under Title (not after). Please
refer to the examples listed above.
Note 5: Only the host mobile phone number can use this SMS function.
Note 6:Two Way Talk and Listen In must be picked up within 25 seconds, or the host
will end the call. A failure SMS will be sent if call back is unsuccessful.
Note 7: Send an SMS with content “???” from a host phone number to receive the
alarm panel model number and its software version.