Operation Manual

2. Features
• 868MHz Radio Frequency
• 50 wireless zones
• SIM card slot for GSM connection
• SMS & phone call notifications up to 10 numbers
• Easy operation by App
• Easy disarm by RFID tag, with up to 50 tags supported.
• Dial and receive phone calls
• Hands-free two-way talking
• Siren Volume up to 95dB
• Notify user if door/window not closed when trying to Arm
• Hidden Duress Code capability
• Tamper protection feature
• RF jamming detection
3. Install SIM card and first set up
3-1 SIM card installation
Like all GSM devices the GSM alarm panel requires a SIM card to operate.
3-1-1 Preparing the SIM card
a. The SIM card needs to be unlocked before use. You can use a mobile phone to
cancel the input of PIN code or PUK code.
b. Ask your local carrier to disable voice message function of this SIM card.
c. As alarm messages and sending SMS require fees, please inquire with your local
carrier about their charging standards.
d. The SIM card size required is Mini SIM. For Micro SIM and Nano SIM, use a SIM
card adaptor before inserting into the alarm panel.
e. Ensure the SIM card is not expired.
3-1-2 Inserting the SIM card
1. Remove battery cover of the alarm panel.
2. Insert a SIM card into the slot and connect the 9V
power adapter.
3. Wait until the GSM status led blinks slowly (once
every 3 seconds) implying the SIM card is ready for
use.
3-2 Setting Up the Host Phone Number
First of all you need to enter the Host Phone Number so that the GSM notification
can function normally. The host phone number refers to the owner’s phone number
that needs to be entered into the alarm panel so that it will recognize SMS
commands sent from the owner’s phone.
Note: The “Show Caller ID” function on the owner’s mobile phone must be turned
on. The alarm panel can then determine if this number is authorized to use SMS
commands.
1. Begin configuration by entering the default configuration PIN code ‘1234’
2. On the touch keypad, enter 66 + PARM Key + Owner’s number + PARM key
Note: Do not enter the phone number of the SIM card inside the alarm panel.
3. You will receive an SMS message saying phone number set successfully.
4. Your alarm panel can now be controlled from the smartphone app.