Installation Manual

GCT LTE Module Software Development Guide
Version V2.2
Aquila Confidential
Page10of27
4
Debugging Information Output
4.1 DM tools
In some cases, such as debugging, information output, version view, version upgrade, etc. user
need to access the module from an external PC or CPE. One way is provide:
The GCT module has a private IP inside: 169.254.0.1 .Users can log in to 169.254.0.1 on the web
page.
Access method:
1. CPE side network card needs to configure the same segment address(169.254.0.xx)
then you would get a route automatic :
then you can ping the module interval ip:
2. Then you can telnet to the module interval from your baseboard：
gdm7243 login: root
Password：Si8a&2vV9
4.2 Module log
If you want to
capture the logs of the module during booting up:
1st. telnet to the module interval