User's Manual

UPnP
On this page, you can enable or disable the Universal Plug and Play (UPnP) function.
To enable UPnP, perform the following steps:
1. Choose Firewall > UPnP.
2. Set UPnP to Enable.
3. Click Submit. As shown in Figure 5-54.
Figure 5- 54
DoS
On this page, you can enable or disable the Denial of service (DoS) function.
1 Choose Firewall > DoS.
2 Set UPnP to Enable.
3 Click Submit. As shown in Figure 5-55.
Figure 5- 55