User's Manual
Table Of Contents
- 1 Getting Started
- 2Overview
- 3Statistics
- 4Update
- 5Settings
- 5.6 VPN
- 5.7 IPv6
- 5.8 System
- 6FAQs
Figure 5- 63
5.8.3 Date & Time
You can set the system time manually or synchronize it with the network. If you select Sync from
network, the CPE regularly synchronizes the time with the specified Network Time Protocol (NTP)
server. If you enable daylight saving time (DST), the CPE also adjusts the system time for DST.
To set the date and time, perform the following steps:
1. Choose System > Date & Time.
2. Select Set manually.
3. Set Local time or click Sync to automatically fill in the current local system time.
4. Click Submit. As shown in Figure 5-64.