Quick Start Guide

Please also prepare the following tools:：Screw Drivers、Adjustable
spanner、Debug Ethernet Cable；
Choose Install Location
When choosing a location to install the ODU, remember that the ODU’s
front panel should point towards your service provider’s nearest base
station. You do not need to be able to see the base station from the
ODU’s position. However, if you have trouble with signal reception, a
Line of Sight (LoS) connection may produce better results.
The ODU must be within the lightning rod protection scope (45
degrees) to avoid being damaged by a lightning strike.
If the ODU is installed on a rooftop, the ODU must be less than 2 m
above the rooftop.
The ODU performance varies according to the installation position and
nearby obstacles, especially metal objects. You are advised to install
the ODU in an open area without obstacles.
Installing Outdoor Unit
Pole Mounting:
REV.
ZONE
DATE
DESCRIPTION
SIGN APPROVER
V1.0
---
2021-05-17
Zhou Mo
Tong Mingxu
--- --- --- --- --- ---
GENERAL TORANCE
A B
C
D
0~8 ±
0.03 0.05 0.10 0.20
8~25 ±
0.05 0.08 0.20 0.30
25~80 ±
0.08 0.12 0.30 0.40
80~250 ±
0.12 0.20 0.40 0.50
250~ ±
0.20 0.30 0.50 0.60
SELECT
A
QUANTITY
1
SCALE 1:1
SIZE
A1
UNIT
mm
SHEET 1 of 1
VIEW DIRECTION
上海旷通科技有限公司
PART NAME LTE outdoor CPE说明书
PART NO.
---
PROJECT NAME
波浪壳
DESIGN
Zhou Mo
MATERIAL
SEE NOTES
CHECK
Wang Huaibing
FINISH SEE NOTES
APPROVAL
Tong Mingxu
DATE
2021-05-17
DIM
GRADE
5 876
41 2
3
12
9 10
11
13 1615
14
A
B
C
E
F
D
L
K
J
H
G
I
14
15 1613
11
109
12
3
21 4
6 7 85
I
G
H
J
K
L
D
F
E
C
B
A
LTE Outdoor CPE
Quick Start Guide
Introduction
LTE outdoor CPE is a highly advanced LTE outdoor multi-service
product solution specifically designed to meet integrated data
needs for residential, business and enterprise users. The product
supports advanced Gigabit networking functionalities. It enables
wide service coverage and provides high data throughput and
networking features to customers who needs easy broadband
access.
Panel of device
1
· I/O panel of ODU ·
Packing List
Make sure you have everything you need to properly configure the
device.
ODU PoE Ethernet cablePower supply
Stainless steel
clamp
Cable glands Slotted end cap
2
How does it work
1. Connect the Power Adapter to PoE injector.
2. PoE injector provides the power to ODU via LAN cable.
3. PC connects LAN Cable to PoE, then PC can surf the Internet
when ODU accesses the LTE network.
This quick installation guide shows you how to configure your ODU
in order to access the Internet.
Configure hardware
Please make sure that you are familiar with all
accident prevention and safety procedures
necessary for working at height and with electrici-
ty before starting to install the device.
DO NOT install the ODU during a lightning storm.
Insert a SIM Card to the Slot
3
Mount the ODU
4 5
Connect the PoE
Place a CAT5e (or above) Ethernet cable (not included) from the
location of your intended Router to the desired PC location.
If you intend to use cable clamps or other methods to secure the
cable, do not tighten them until you finish installing the Router and
ODU.
Preparation work
Before installing the CPE, verify that you have all the items listed in
the packing list,：ODU unit、Power Adapter & PoE 、Steel clamp、
Ethernet Cable、Cable glands、Slotted end cap、Quick Start
Guide；
if any of the items is missing or damaged, please contact your LTE
device provider.
ODU
Computer
PoE Adapter
Hardware connections of Router
6
7
8
Configure the CPE
Login to the website
Use a browser to access the management web page to configure
and manage the CPE.
The following procedure describes how to use a computer running
Windows 7 or above version and Internet Explorer to connect to the
CPE webpage.
Connect to the CPE correctly.
Start Internet Explorer, type http://192.168.0.1 in the
address bar, and press Enter.
Enter the user name and password, and click Log In.
You can connect to the management web page after the password
is verified.
9
Configuration of LTE
Step 1 Connect to the CPE correctly.
Step 2 Go to the management website.
Step 3 Choose Settings → Network → LTE Settings.
Step 4 Set the connection mode and scan mode.
The default setting is automatic connection and full band
scanning, if you want to connect to the LTE network according to
your needs, you can set the connection mode as manual, and simply
scan a specific band.
10 11
Frequently Asked Questions
· Make sure that the CPE is powered on.
· Verify that the CPE is correctly connected to the computer through
a network cable.
If the problem persists, contact authorized local service suppliers.
· Check that the power adapter and PoE have connected to the CPE
properly.
· Check that the CPE is placed in an open area that is far away from
obstructions, such as concrete or wooden walls.
· Check that the CPE is placed far away from household electrical
appliances that generate strong electromagnetic field, such as
microwave ovens, refrigerators, and satellite dishes.
If the problem persists, contact authorized local service suppliers.
· The CPE is heated after being used for long time. Therefore, you
must turn off the CPE when not you are using.
· Check that the CPE is properly ventilated and protected from direct
sunlight.
Fails to Log in to the web management page.
· Make sure that the power cable is connected to the PoE, and the
CPE is connected to the right port of the PoE.
· Make sure that the power adapter and PoE are compatible with the
CPE.
The POWER indicator does not turn on.
The CPE fails to search for the LTE network.
The CPE power adapter has overheated
· If the CPE powers off unexpectedly while being configured, the
parameters may be restored to the default settings.
· After configuring the parameters, download the configuration file to
quickly restore the CPE to the desired settings.
The parameters are restored to default values.
12
Some features of the product and its accessories described herein
rely on the software installed, capacities and settings of local
network, and may not be activated or may be limited by local
network operators or network service providers, thus the descrip-
tions herein may not exactly match the product or its accessories
you purchase.
We reserves the right to change or modify any information or
specifications contained in this manual without prior notice or
obligation.
Notice
Step 1 Connect the CAT5e (or above) Ethernet cable to PoE.
Step 2 Connect the power adapter to the PoE injector. The POWER
LED turns on a solid green-yellow once connected.
Step 3 Connect the included Ethernet cable from the computer to
one of the Router's Ethernet ports.
LED Behavior
When setting up the Outdoor Unit, the LED will have the following
behavior.
FCC Regulations:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. To comply with FCC RF Exposure
compliance requirements, this grant is
applicable to only Mobile
Configurations. The antennas used for the transmitter must be
installed to provide a separation distance of at least 20cm from all
persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
XXXXXX
Do not connect to a computer or switch directly
to the PoE port due to high PoE power.
CAUTION
Make sure the ODU is turned off before you insert
your SIM card. It is recommended to NOT connect
the PoE cable when you do this step. Otherwise, the
SIM card may be damaged.
CAUTION
CAUTION
Step 1
Step 2
Step 3
ODU
POWER
Steady on
Off
Off
Power on
No power supply
INTERNET
Steady on Internet available
Internet unavailable
Blinking
(500ms interval)
Searching network
Off
SIM
Steady on SIM ready
No SIM detected
Yellow
Green Signal strong
Signal good
Red
Signal weak
Blinking Green and Red Firmware upgrade
SIGNAL
Note：
1.尺寸：595x130mm（单页尺寸：85x130mm）
2.材质：128g铜版纸
3.折叠方式：风琴折
4.印刷要求：彩色印刷，字迹图片清晰，无错印漏印，无明显污渍。
Ethernet Cable Connection:
NOTE: Make sure you have inserted your SIM card into the ODU.
Step 1 Connect the CAT5e or higher level Ethernet cable which is
connected to the ODU to the PoE port.
Step 2 Connect the included Ethernet cable from the computer to Data
port of the POE.