User's Manual

3
The following steps need to be completed to use the smaXtec Classic Bolus SX.2:
1. Activation process, consisting of
o Switching on the Classic Bolus SX.2
o Assigning the bolus to an animal
2. Bolus administration
Please note that you need an activated smaXtec Base Station SX.2 as well as a smaXtec
account with an organisation before using smaXtec Classic Boluses SX.2.
1: Activation: Switching on the Classic Bolus SX.2
Ensure that your smaXtec Base Station SX.2 is activated and ready for use before
starting the bolus activation process.
Switch on the smaXtec Classic Bolus using the magnet delivered with the smaXtec Base
Station.
The bolus starts the initialisation process. It lights up continuously for 13 to 26 seconds. If
the bolus then blinks every two seconds, the process was successful.
Overview of the different LED displays
Bolus starts initialisation
LED lights up continuously for 13 to 26 seconds
Bolus successfully initialised
LED flashes every two seconds for 10 minutes
Error during initialisation
if the LED does not flash, an error during
initialisation occurred