User's Manual

4
Procedure in case of error during initialisation
If the bolus doesn’t show the indicated blinking pattern, ensure that you are within the
read-out range of the smaXtec Base Station SX.2 and repeat the process once or twice.
If it doesn’t work then, please get in touch with the smaXtec support. Do not administer
the bolus to an animal in this case!
2: Activation: Assigning the bolus to an animal
After switching on the bolus successfully, start with the second step of the activation
process: Assigning the bolus to an animal. This can be done both in the smaXtec
Messenger and the smaXtec App. You can either create a new animal in the system or
assign the bolus to an existing animal (e.g. that was created upfront via the animal
importer).
ATTENTION:
The activation process is only completed after the bolus has been assigned to an animal.
If the bolus is not assigned, no data or alerts will be generated or displayed.
3: Bolus administration
After completing the activation process (switching on the bolus using the magnet and
assigning it to an animal), administer the bolus on the same day with the smaXtec bolus
applicator.