User's Manual

17
4.4 Configuring an Apple® Macintosh® Computer
The following procedure describes how to configure TCP/IP on an Apple Macintosh running Mac OS 10.2.
If your Apple Macintosh is running Mac OS 7.x or later, the steps you perform and the screens you see
may differ slightly from the following. However, you should still be able to use this procedure as a guide to
configuring your Apple Macintosh for TCP/IP.
1. Pull down the Apple Menu, click System Preferences, and select Network.
2. Verify that NIC connected to the Gateway is selected in the Show field.
3. In the Configure field on the TCP/IP tab, select Using DHCP.
4. Click Apply Now to apply your settings and close the TCP/IP dialog box.