User's Manual

22
Step 2:
4. In the Wizard Step 2 page, enter a name for you wireless network.
5. Select the encryption method from the drop-down list.
6. Enter the Wi-Fi network password. The length of password must meet the requirement of its
encryption method.
7. Click FINISH button to complete the basic configuration for your Gateway.
Option Description
Enter WiFi
Network Name
Sets a name for your wireless network.
Encryption
Method
Selects an encryption method for your wireless network. Except Open method, you
have to set the password for wireless network.
Enter Network
Password
WEP 64: requires a 5 ASCII character or 10 hex character password.
WEB 128: requires a 13 ASCII character or 16 hex character password.
WPA-PSK (TKIP): requires an 8-63 ASCII character or a 64 hex character
password.
WPA-PSK (AES): requires an 8-63 ASCII character or a 64 hex character password.
WPA2-PSK (TKIP): requires a 8-63 ASCII character password.
WPA2-PSK (AES): requires a 8-63 ASCII character password.
Note: The hex (hexadecimal) character means only A to F and 0 to 9
(ABCDEF0123456789) characters can be used.