User's Manual

4
2.2 Front Panel Push Buttons
There are two push buttons on the front side of the Gateway. One is for DECT pager and the other is for
DECT Register/WPS settings.
Symbol Function Type Description
DECT Pager Button
Press this button to page the misplaced DECT handset. Or,
press this button continuously for more than ten seconds to
register the DECT handset.
DECT Register/
WPS
Button
Press this button to make a wireless connection between the
Gateway and the WPS-enabled client. Or, press this button to
register a DECT handset.
LED
Blinking = The Gateway is waiting for a WPS-enabled client to
associated with. Or, the DECT handset is registering.
ON = The association between the Gateway and the
WPS-enable client is done.
2.2.1 Finding a Misplaced DECT Handset
If the handset is misplaced, press this DECT Pager button on the front panel of the Gateway. All the
handsets registered with that the Gateway will ring. When the handset is found, press this button again to
stop ringing. To stop the ringing on an individual handset, press the Phone Off key or End softkey on the
handset.
2.2.2 Making a Wireless Connection
Press DECT Register/ WPS button, this LED will blink for 120 seconds.
 If there is no WPS-enabled client associated with the Gateway within 120 seconds, the LED will turn
OFF
 If there is a WPS-enabled client associated with the Gateway within 120 seconds, the LED will turn
solid ON. After data exchanging completed, this LED turns OFF.