Reduced Wiring System Instruction Manual

4140
NOTE
Tighten the waterproof cap by the specified tightening torque.
( 0.05N m for M8, 0.1N m for M12 )
Waterproof cap
Mounted on unused ports of GW unit, input block, power block and output block.
The proper use of this waterproof cap can achieve IP65 Enclosure.
7
EX500 - AW
How to order
Connector specification
ES M8 connector ( socket ) /10 pcs.
TP M12 connector ( plug ) /1 pc.
TS M12 connector ( socket ) /10 pcs.
Branch cable with M12 connector
For details, refer to subsection "Wiring" ( page 17 ) in section "EX500" in this manual.
EX500 - AC030 - SSPS
How to order
Cable length (L) Connector specification
003 0.3 [m]
005 0.5 [m]
010 1 [m]
030 3 [m]
050 5 [m]
SSPS Socket side : Straight, Plug side : Straight
SAPA
Socket side : Angle, Plug side : Angle
Power supply connector cable
For details, refer to subsection "Wiring" ( page 13 ) of section "EX500" in this manual.
EX500 - AP 050 - S
How to order
Cable length (L) Connector specification
010 1 [m]
050 5 [m]
S Straight
A Angle
Terminal Plug
Connected to C1 ( or 0 ) of SI unit when Input unit manifold is unused. ( If this terminal plug
is not used, COM LED of GW unit does not light on. )
6
EX500 - AC000 - S
How to order
1
7
6
5
4
3
2
8
M12
16
44.7
Plug Connector Pin Layout
Option
Cable with Ethernet communication connector
For details, refer to subsection "Wiring" ( page 12 ) in section "EX500" in this manual.
EX9 - AC 020 EN- PSRJ
PSRJ M12 plug(straight) RJ45 connector
020 2 [m]
How to order
Cable length (L) Connector specification
Output Cable
For details, refer to subsection "Wiring" ( page 35 ) of section "EX9 series General Purpose
Output Block" in this manual.
EX9 - AC 010 -7
How to order
Cable length ( L )
010 1 [m]
030 3 [m]
Power Supply Cable ( for power input connector of Power Block )
For details, refer to subsection "Wiring" ( page 37 ) of section "EX9 series General Purpose
Output Block" in this manual.
EX9 - AC 010 -1
How to order
Cable length ( L )
010 1 [m]
030 3 [m]
050 5 [m]