Angular Style Air Gripper Toggle Type Series MHT2 MHZ MHF MHL MHR MHK MHS MHC MHT MHY MHW MRHQ Misc.
Angular Style Air Gripper Toggle Type Series MHT2 Size: 32, 40, 50, 63 How to Order Ideal for gripping heavy workpiece. The toggle mechanism holds workpiece even when pressure drops. Auto switch is attachable. MHT2 32 D F9BW S Toggle type air gripper Number of fingers 2 Without auto switch (Built-in magnet) Nil 2 fingers Nil S n ∗ For the applicable auto switch model, refer to the table below. Bore size 32 40 50 63 Number of auto switches Auto switch 32 mm 40 mm 50 mm 63 mm 2 pcs. 1 pc.
Angular Style Air Gripper Toggle Type Series MHT2 Effective Gripping Force MHT2-32D L = 100 mm L Gripping point distance (mm) Gripping force (N) • Workpiece gripping point should be within the range indicated in the graph. MHZ Pressure 0.6 MPa MHF 0.4 MPa 0.
Series MHT2 Dimensions 8-M6 x 1 mounting thread Thread depth 10 (Both sides) 4-M6 x 1 thread depth 10 Mounting thread Open 28° Closed –3° MHT2-32D Finger closing port Rc 1/8 Finger opening port Rc 1/8 4-M6 x 1 thread depth 15 Mounting thread 4-M6 x 1 bottom hole dia. 5.1 Thread for mounting attachment MHT2-40D 8-M8 x 1.25 mounting thread Thread depth 10 (Both sides) Open 27° Closed –3° 4-M6 x 1 thread depth 10 Mounting thread Finger closing port Rc 1/8 Finger opening port Rc 1/8 4-M8 x 1.
Angular Style Air Gripper Toggle Type Series MHT2 Dimensions MHT2-50D Open 23° Closed –2° 8-M10 x 1.5 mounting thread Thread depth 12 (Both sides) 4-M8 x 1.25 thread depth 14 Mounting thread MHZ MHF MHL MHR MHK MHS Finger closing port Rc 1/4 Finger opening port Rc 1/4 MHC MHT MHY 4-M10 x 5 bottom hole dia. 8.6 Thread for mounting attachment 4-M10 x 1.5 thread depth 12 Mounting thread MHW MRHQ MHT2-63D Misc. D8-M12 x 1.
Series MHT2 Construction Component Parts No.
Angular Style Air Gripper Toggle Type Series MHT2 Auto Switch Hysteresis Mounting of Auto Switch Rail mounting type MHZ MHF MHL MHR MHK Hysteresis Switch operating position (ON) Switch reset position (OFF) MHS MHC Model Hysteresis (Max.) angle MHT2-32D MHT2-40D MHT2-50D MHT2-63D 3 3 3 3 MHT MHY MHW MRHQ Direct mounting type Misc. D-A7, D-A8: Rail mounting type . D-M9쏔V: Direct mounting type are shown above. D- Rail mounting Bore size (mm) 32 40 50 63 D-A7쏔/A80 A 9 13 11 13.5 B 6 8.5 11.
MHZ2/MHZJ2/MHK2/MHKL2/MHC2/MHT2 Auto Switch Installation Example and Mounting Position Series Various auto switch applications are possible through different combinations of auto switch quantities and detecting positions. 1) Detection when Gripping Exterior of Workpiece Detection example Position to be detected Detection combinations Operation of auto switch 1. Confirmation of fingers in reset position 3.
Auto Switch Various auto switch applications are possible through different combinations of auto switch quantities and detecting positions. 2) Detection when Gripping Interior of Workpiece Detection example Position to be detected Detection combinations Operation of auto switch 1. Confirmation of fingers in reset position Position of fingers fully closed Position when gripping Switch turned ON when fingers return. (Light ON) Switch turned ON when gripping a workpiece. (Light ON) 3.
Safety Instructions These safety instructions are intended to prevent a hazardous situation and/or equipment damage. These instructions indicate the level of potential hazard by labels of "Caution", "Warning" or "Danger". To ensure safety, be sure to observe ISO 4414 Note 1), JIS B 8370 Note 2) and other safety practices. Caution : Operator error could result in injury or equipment damage. Warning : Operator error could result in serious injury or loss of life.
Common Precautions Be sure to read before handling. For detailed precautions on every series, refer to main text. Selection Warning 1. Confirm the specifications. Products represented in this catalog are designed for use in compressed air appllications only (including vacuum), unless otherwise indicated. Do not use the product outside their design parameters. Please contact SMC when using the products in applications other than compressed air (including vacuum). Mounting Warning 1.
Quality Assurance Information (ISO 9001, ISO 14001) Reliable quality of products in the global market To enable our customers throughout the world to use our products with even greater confidence, SMC has obtained certification for international standards “ISO 9001” and “ISO 14001”, and created a complete structure for quality assurance and environmental controls. SMC products pursue to meet its customers’ expectations while also considering company’s contribution in society.
SMC Product Conforming to Inter SMC products complying with EN/ISO, CSA/UL standards are supporting CE Mark The CE mark indicates that machines and components meet essential requirements of all the EC Directives applied. It has been obligatory to apply CE marks indicating conformity with EC Directives when machines and components are exported to the member Nations of the EU.
SMC Product Conforming to International Standards national Standards you to comply with EC directives and CSA/UL standards. Mark of compliance for CSA/UL Mark of compliance for CSA CSA Standards & UL Standards UL and CSA standards have been applied in North America (U.S.A. and Canada) symbolizing safety of electric products, and are defined to mainly prevent danger from electric shock or fire, resulting from trouble with electric products.
SMC’s Global Service Network America Europe U.S.A. SMC Corporation of America 3011 North Franklin Road Indianapolis, IN 46226, U.S.A. TEL: 317-899-4440 FAX: 317-899-3102 U.K. SMC Pneumatics (U.K.) Ltd. Vincent Avenue, Crownhill, Milton Keynes, MK8 0AN, Backinghamshire, U.K. TEL: 01908-563888 FAX: 01908-561185 CANADA SMC Pneumatics (Canada) Ltd.
SMC’s Global Service Network Europe Oceania/Asia FINLAND SMC Pneumatics Finland OY PL72, Tiistinniityntie 4, SF-02231 ESP00, Finland TEL: 09-8595-80 FAX: 09-8595-8595 AUSTRALIA SMC Pneumatics (Australia) Pty.Ltd. 14-18 Hudson Avenue Castle Hill NSW 2154, Australia TEL: 02-9354-8222 FAX: 02-9894-5719 NORWAY SMC Pneumatics Norway A/S Vollsveien 13C, Granfoss Næringspark N-1366 LYSAKER, Norway TEL: 67-12-90-20 FAX: 67-12-90-21 NEW ZEALAND SMC Pneumatics (New Zealand) Ltd. 8C Sylvia Park Road Mt.