4-Port Wired Broadband QoS Router User Guide

SMCBR24Q User Manual
Page 10
Interface: The default is WAN 1. If dual WANs are used, you can assign WAN 1 or WAN 2 to the users from
the Interface drop-down menu for bandwidth management.
Min. Rate (Kbit/Sec): You can set up Min. Rate to guarantee bandwidth for individual user. The default is zero.
Total Min. Rate you allocate for all users will not exceed the max upstream rate provided by ISP.
Max. Rate (Kbit/Sec): You can set up Max. Rate to limit bandwidth for individual user. The default is the max
upstream rate provided by ISP. If you set up the max rate as 0 Kbit/Sec for the specific user, that user will not
be able to access the internet.
Delete: You can click the trash can icon to delete the users whose bandwidth you don’t need to manage
anymore.
Note 1:
Any deleted on-line client can be recovered by an ipconfig /release & ipconfig /renew. To make this
happen, at the command prompt of a client computer, type ipconfig /release. After the computer finishes
performing the command, type ipconfig /release, then type ipconfig /renew.
Note 2:
Any configurations here except the default will make the Q-button a hot key. For more details,
please refer to Q-button–Home Mode.
ISP Bandwidth
Enter the max upstream and downstream rates provided by ISP. The default rate is 512 Kbit/Sec.
Note:
Any configurations here except the default will make the Q-button a hot key. For more details,
please refer to Q-button–Home Mode.
For more information, click the Help button. Click the Save Settings button to save System Summary settings
or click the Cancel button to undo changes.