4-Port Wired Broadband QoS Router User Guide

SMCBR24Q User Manual
Page 13
PPPoE (Point-to-Point Protocol over Ethernet):
Please check with your ISP to make sure whether PPPoE should be enabled or not.
If they do use PPPoE,
1. Enter your Username and Password.
2. If you select Connect on Demand option, the PPPoE connection will be disconnected if it has
been idle for a period longer than the Max Idle Time setting.
3. If you select Keep Alive option, the Router will keep the connection alive by sending out a few data
packets at Redial Period, so your Internet service thinks that the connection is still alive.
PPTP (Point-to-Point Tunneling Protocol):