4-Port Wired Broadband QoS Router User Guide

SMCBR24Q User Manual
Page 53
Password
The Router's default password is 'smcadmin', and it is strongly recommended that you change the Router's
password. If you leave the password as blank, all users on your network will be able to access the Router
simply by entering the unit’s IP address into their web browser’s location window.
Old Password:
Enter the old password. The default Password is ‘admin’ when you first power up the Router.
(Note: The password cannot be recovered if it is lost or forgotten. If the password is lost or forgotten, you will
need to reset the Router to its factory default state.)
New Password:
Enter a new password for the Router. Your password must be less than 64 characters long and it can’t contain
any spaces.
Confirm New Password:
Re-enter the password for confirmation.