4-Port Wired Broadband QoS Router User Guide

SMCBR24Q User Manual
Page 79
Bandwidth
Enter the max. upstream and downstream bandwidth provided by ISP.
Protocol Binding
SMCBR24Q supports the Protocol Binding functionality. It allows users to specify the internal IP or/and
Service going through the specified WAN port.
Service: Users can choose the Service from the drop-down menu, or click the service management to add
new Service. The default Service is SMTP.
Source IP: Users can specify the internal IP to go through the specific WAN port. If users need the Service
Binding only, entering zero in Source IP filed is suggested.
Destination IP: Users can specify the specific Service from the internal Source IP to Destination IP go
through the specific WAN port, and enter the Destination IP. If users need the Service Binding only,
entering zero in Destination IP filed is suggested.
If users need IP Binding only, please select ‘All’ from the Service drop-down menu.
Interface: Choose WAN1 or WAN2.
Enable: Users can check the enable box to enable this Protocol Binding rule.
Click Add to list button to add the Protocol Binding rule to list, and users can set up to 30 rules, or click
Delete selected application button to delete the selected rule.