Network Router User Manual

Status Information

6-89

CLI Commands for Displaying Event Logs – To view the access point log entries,

use the show event-log command from the Exec mode. To clear all log entries from

the access point, use the logging clear command from the Global Configuration

mode.

Enterprise AP#show event-log 7-33

Mar 09 11:57:55 Information: 802.11g:11g Radio Interface Enabled

Mar 09 11:57:55 Information: 802.11g:Radio channel updated to 8

Mar 09 11:57:34 Information: 802.11g:11g Radio Interface Enabled

Mar 09 11:57:18 Information: 802.11g:11g Radio Interface Enabled

Mar 09 11:55:52 Information: SSH task: Set SSH server port to 22

Mar 09 11:55:52 Information: SSH task: Enable SSH server.

Mar 09 11:55:52 Information: Enable Telnet.

Mar 09 11:55:40 Information: 802.11g:11g Radio Interface Disabled

Mar 09 11:55:40 Information: 802.11g:Transmit Power set to QUARTER

Press <n> next. <p> previous. <a> abort. <y> continue to end :

Enterprise AP#configure

Enter configuration commands, one per line. End with CTRL/Z

Enterprise AP(config)#logging clear 7-32

Enterprise AP#