Network Router User Manual

Command Line Interface
7-64
7
show radius
This command displays the current settings for the RADIUS server.
Default Setting
None
Command Mode
Exec
Example
Enterprise AP#show radius
Radius Server Information
========================================
Status : Disabled
IP : 0.0.0.0
Port : 1812
Key : *****
Retransmit : 3
Timeout : 5
Accounting Port : 0 (Disabled)
InterimUpdate : 3600
Accounting Server State : DOWN
Radius MAC format : no-delimiter
Radius VLAN format : HEX
========================================
Radius Secondary Server Information
========================================
Status : Disabled
IP : 0.0.0.0
Port : 1812
Key : *****
Retransmit : 3
Timeout : 5
Accounting Port : 0 (Disabled)
InterimUpdate : 3600
Accounting Server State : DOWN
Radius MAC format : no-delimiter
Radius VLAN format : HEX
========================================
Enterprise AP#