User's Manual

 Single administrator logon. Only one administrator can log on to the

SMC2585W-G for management purposes at a time.

 SNMP.

SNMP (Simple Network Management Protocol) MIB I, MIB II, IEEE 802.1d,

and Private Enterprise MIB are supported.

 UPnP.

The SMC2585W-G responds to UPnP discovery messages so that a Win-

dows XP user can locate the SMC2585W-G in My Network Places and use a Web

browser to configure it.

 Telnet.

The SMC2585W-G can be managed by Telnet.

 System log. For system operational status monitoring.

 Local log. System events are logged to the on-board RAM of the

SMC2585W-G and can be viewed using a Web browser.

 Remote log by SNMP trap. Systems events are sent in the form of SNMP

traps to a remote SNMP management server.

 Remote log by BSD Syslog. Systems events are sent in the form of BSD

Syslog (RFC3164

) to a remote Syslog server.

z Power over Ethernet

. Supplying power to an SMC2585W-G over an Ethernet cable

using optional SMCPWR-INJ3 Power Injector (IEEE 802.3af compliant). This feature

facilitates large-scale wireless LAN deployment.

z Hardware Watchdog Timer. If the firmware gets stuck in an invalid state, the hardware

watchdog timer will detect this situation and restart the SMC2585W-G. This way, the

SMC2585W-G can provide continuous services.