User's Manual

S WITCH S TATIC C ONFIGURATION M ENU
4-27
Field Attributes
• MAC Address – Physical address of a device mapped to this interface.
•Port Num – Port associated with the device assigned a static address.
•Vlan ID – ID of configured VLAN (1-4094). This option is only
available if IEEE 802.1Q tagged VLANs are enabled (page 4-22).
Console – Click Switch Static Configuration
=> MAC Address
Configuration
=> Static MAC Address. Click <Add> to open the Add
Static MAC Address page. Specify the MAC address, port number, and
VLAN ID, then save your settings.
After you configure a new address, it will be displayed on the Static MAC
Address Configuration page as shown below.
TigerSwitch 10/100 : Add Static MAC Address
=====================
Mac Address :0030299434DE
Port num :2
Vlan ID :1
actions-> <Edit> <Save> <Quit>
Save successfully!Press any key to return!
Arrow/TAB/BKSPC = Move Item Quit = Previous menuu Enter = Select Itemm
TigerSwitch 10/100 : Static MAC Address Configuration
=====================
Mac Address Port num Vlan ID Mac Address Port num Vlan ID
------------------------------- -------------------------------
0030299434DE 2 1
actions-> <Add> <Edit> <Delete> <Save> <Quit>
Add/Edit/Delete static MAC addresses.
Arrow/TAB/BKSPC = Move Item Quit = Previous menu Enter = Select Item