User's Manual

VLAN C ONFIGURATION
3-191
• Non-Member – VLANs for which the selected interface is not a tagged
member.
Web – Click VLAN, 802.1Q VLAN, Static Membership by Port. Select an
interface from the scroll-down box (Port or Trunk). Click Query to display
membership information for the interface. Select a VLAN ID, and then
click Add to add the interface as a tagged member, or click Remove to
remove the interface. After configuring VLAN membership for each
interface, click Apply.
Figure 3-81 Assigning VLAN Port and Trunk Groups
CLI – This example adds Port 3 to VLAN 1 as a tagged port, and removes
Port 3 from VLAN 2.
Configuring VLAN Behavior for Interfaces
You can configure VLAN behavior for specific interfaces, including the
default VLAN identifier (PVID), accepted frame types, ingress filtering,
GVRP status, and GARP timers.
Command Usage
• GVRP – GARP VLAN Registration Protocol defines a way for switches
to exchange VLAN information in order to automatically register VLAN
members on interfaces across the network.
Console(config)#interface ethernet 1/3
Console(config-if)#switchport allowed vlan add 1 tagged 4-238
Console(config-if)#switchport allowed vlan remove 2