User's Manual

C OMMAND G ROUPS
4-12
The access mode shown in the following tables is indicated by these
abbreviations:
NE (Normal Exec) IC (Interface Configuration)
PE (Privileged Exec) VC (VLAN Database Configuration
GC (Global Configuration) ACL (Access Control List Configuration)
LC (Line Configuration)
Power over
Ethernet
*
Configures power output for connect devices 4-90
Address Table Configures the address table for filtering specified
addresses, displays current entries, clears the table, or
sets the aging time
4-200
Spanning Tree Configures Spanning Tree settings for the switch 4-204
VLANs Configures VLAN settings, and defines port
membership for VLAN groups; also enables or
configures private VLANs
4-230
GVRP and
Bridge Extension
Configures GVRP settings that permit automatic
VLAN learning; shows the configuration for bridge
extension MIB
4-248
Priority Sets port priority for untagged frames, selects strict
priority or weighted round robin, relative weight for
each priority queue, also sets priority for TCP/UDP
traffic types, IP precedence, and DSCP
4-253
Multicast Filtering Configures IGMP multicast filtering, query parameters,
and specifies ports attached to a multicast router
4-269
IP Interface Configures the IP address and gateway for management
access
4-280
DNS Configures DNS services 4-286
* Only the SMC6824MPE and SMC6826MPE support Power over Ethernet.
Table 4-4 Command Group Index (Continued)
Command Group Description Page