User's Manual

C OMMAND L INE I NTERFACE
4-43
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect to
the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
Example
Related Commands
ip http secure-server (4-41)
Telnet Server Commands
ip telnet server
This command allows this device to be monitored or configured from
Telnet. It also specifies the TCP port number used by the Telnet interface.
Use the no form without the “port” keyword to disable this function. Use
the no from with the “port” keyword to use the default port.
Syntax
ip telnet server [port port-number]
no telnet server [port]
• port - The TCP port number used by the Telnet interface.
• port-number - The TCP port to be used by the browser interface.
(Range: 1-65535)
Console(config)#ip http secure-port 1000
Console(config)#
Table 4-14 Telnet Server Commands
Command Function Mode Page
ip telnet server Allows the switch to be monitored or configured
from Telnet; also specifies the port to be used by
the Telnet interface
GC 4-40