User's Manual

C OMMAND L INE I NTERFACE
4-79
show system
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to
“Displaying System Information” on page 3-13.
• The POST results should all display “PASS.” If any POST test indicates
“FAIL,” contact your distributor for assistance.
Example
Console#show system
System description: TigerStack III 10/100 -
6824M Managed 24+2 Stackable Switch;
SW version: V2.4.2.13
System OID string: 1.3.6.1.4.1.202.20.28
System information
System Up time: 0 days, 0 hours, 1 minutes, and 25.59
seconds
System Name: [NONE]
System Location: [NONE]
System Contact: [NONE]
MAC address: 00-04-E2-B3-16-C0
Web server: enabled
Web server port: 80
Web secure server: enabled
Web secure server port: 443
Telnet server: enable
Telnet server port: 23
Authentication login: local
Authentication enabled: local
POST result
Uart Loopback Test ........... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
PCI Device Test .............. PASS
Switch Int Loopback test ..... PASS
Done All Pass.
Console#