User's Manual

F LASH /F ILE C OMMANDS
4-82
copy
Use this command to move (upload/download) a code image or
configuration file between the switch’s flash memory and a TFTP server.
When you save the system code or configuration settings to a file on a TFTP
server, that file can later be downloaded to the switch to restore system
operation. The success of the file transfer depends on the accessibility of the
TFTP server and the quality of the network connection.
Syntax
copy file {controller | file | running-config | startup-config | tftp |
unit}
copy running-config {file | startup-config | tftp}
copy startup-config {file | running-config | tftp}
copy tftp {file | running-config | startup-config | https-certificate |
public-key}
copy unit file
• controller - Allows you to download new PoE controller code files.
• file - Keyword that allows you to copy to/from a file.
• running-config - Keyword that allows you to copy to/from the
current running configuration.
• startup-config - The configuration used for system initialization.
• tftp - Keyword that allows you to copy to/from a TFTP server.
• unit - Keyword that allows you to copy to/from a specific unit in the
stack.
• https-certificate - Keyword that allows you to copy the HTTPS
secure site certificate.
• public-key - Keyword that allows you to copy a SSH key from a
TFTP server. (See “Secure Shell Commands” on page 4-44.)
Default Setting
None
Command Mode
Privileged Exec