User's Manual

C OMMAND L INE I NTERFACE
4-93
power inline
This command instructs the switch to automatically detect if a
PoE-compliant device is connected to the specified port, and turn power on
or off accordingly. Use the no form to turn off power for a port.
Syntax
[no] power inline
Default Setting
Detection is enabled for PoE-compliant devices.
Command Mode
Interface Configuration
Command Usage
When detection is enabled for PoE-compliant devices, power is
automatically supplied when a device is detected on the port, providing
that the power demanded does not exceed switch’s power budget.
Example
power inline maximum allocation
This command limits the power allocated to specific ports. Use the no form
to restore the default setting.
Syntax
power inline maximum allocation [milliwatts]
no power inline maximum allocation
milliwatts - The maximum power budget for the port.
(Range: 3000 - 15400 milliwatts).
Default Setting
15400 milliwatts
Console(config)#interface ethernet 1/1
Console(config-if)#power inline auto
Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#no power inline
Console(config-if)#