User's Manual

A CCESS C ONTROL L IST C OMMANDS
4-136
• A packet matching a rule within the specified ACL is mapped to one of
the output queues as shown in the following table. For information on
mapping the CoS values to output queues, see queue cos-map on
page 4-257.
Example
Related Commands
queue cos-map (4-257)
show map access-list ip (4-136)
show map access-list ip
This command shows the CoS value mapped to an IP ACL for the current
interface. (The CoS value determines the output queue for packets matching
an ACL rule.)
Syntax
show map access-list ip [interface]
interface
ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26)
Command Mode
Privileged Exec
Example
Table 4-37 Egress Queue Priority Mapping
Queue 0123
Priority 1,2 0,3 4,5 6,7
Console(config)#interface ethernet 1/2
Console(config-if)#map access-list ip bill cos 0
Console(config-if)#
Console#show map access-list ip
Access-list to COS of Eth 1/4
Access-list ALS1 cos 0
Console#