User's Manual

C OMMAND L INE I NTERFACE
4-183
Table 4-47 show interfaces switchport - display description
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled; if
enabled it also shows the threshold level (page 4-177).
LACP status Shows if Link Aggregation Control Protocol has been enabled
or disabled (page 4-190).
Ingress/Egress rate
limit
Shows if rate limiting is enabled, and the current rate limit
(page 4-187).
VLAN membership
mode
Indicates membership mode as Trunk or Hybrid (page 4-234).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-236).
Acceptable frame
type
Shows if acceptable VLAN frames include all types or tagged
frames only (page 4-235).
Native VLAN Indicates the default Port VLAN ID (page 4-237).
Priority for untagged
traffic
Indicates the default priority for untagged frames (page 4-253).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or
disabled (page 4-250).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)”
indicates untagged and “(t)” indicates tagged (page 4-238).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via
GVRP (page 4-239).
Private VLAN mode Shows the private VLAN mode as host, promiscuous, or none
(page 4-245).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this
port is associated (page 4-245)..
Private VLAN
mapping
Shows the primary VLAN mapping for a promiscuous port
(page 4-246).