User's Manual

OMMAND

INE

NTERFACE

4-233

interface vlan

This command enters interface configuration mode for VLANs, which is

used to configure VLAN parameters for a physical interface.

Syntax

interface vlan vlan-id

vlan-id - ID of the configured VLAN. (Range: 1-4093, no leading

zeroes)

Default Setting

None

Command Mode

Global Configuration

Example

The following example shows how to set the interface configuration mode to

VLAN 1, and then assign an IP address to the VLAN:

Related Commands

shutdown (4-176)

switchport forbidden

vlan

Configures forbidden VLANs for an

interface

IC 4-239

switchport priority

default

Sets a port priority for incoming untagged

frames

IC 4-255

Console(config)#interface vlan 1

Console(config-if)#ip address 192.168.1.254 255.255.255.0

Console(config-if)#

Table 4-59 Configuring VLAN Interfaces (Continued)

Command Function Mode Page