User's Manual

OMMAND

INE

NTERFACE

4-235

switchport acceptable-frame-types

This command configures the acceptable frame types for a port. Use the no

form to restore the default.

Syntax

switchport acceptable-frame-types {all | tagged}

no switchport acceptable-frame-types

• all - The port accepts all frames, tagged or untagged.

• tagged - The port only passes tagged frames.

Default Setting

All frame types

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

When set to receive all frame types, any received frames that are untagged

are assigned to the default VLAN.

Example

The following example shows how to restrict the traffic passed on port 1 to

tagged frames:

Related Commands

switchport mode (4-234)

Console(config)#interface ethernet 1/1

Console(config-if)#switchport acceptable-frame-types tagged

Console(config-if)#