User's Manual

VLAN C OMMANDS
4-246
switchport private-vlan host-association
Use this command to associate an interface with a secondary VLAN. Use the
no form to remove this association.
Syntax
switchport private-vlan host-association secondary-vlan-id
no switchport private-vlan host-association
• secondary-vlan-id – ID of secondary (i.e, community) VLAN.
(Range: 1-4093, no leading zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
All ports assigned to a secondary (i.e., community) VLAN can pass traffic
between group members, but must communicate with resources outside
of the group via a promiscuous port.
Example
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the no form
to remove this mapping.
Syntax
switchport private-vlan mapping primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id – ID of primary VLAN. (Range: 1-4093, no leading
zeroes).
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan host-association 3
Console(config)#