User's Manual

C OMMAND L INE I NTERFACE
4-279
Example
The following shows how to configure port 11 as a multicast router port
within VLAN 1:
show ip igmp snooping mrouter
This command displays information on statically configured and dynamically
learned multicast router ports.
Syntax
show ip igmp snooping mrouter [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4093)
Default Setting
Displays multicast router ports for all configured VLANs.
Command Mode
Privileged Exec
Command Usage
Multicast router port types displayed include Static or Dynamic.
Example
The following shows the ports in VLAN 1 which are attached to multicast
routers:
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console(config)#
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------- -------
1 Eth 1/11 Static
Console#